• Analog System
     
    PM-13/BPS Solid-State MM/MC phono stage
    Tonearm
     
    Turntable
    Phono stage
     
    PM-13:
    MM phono stage of PM-13 and PM-11 is the same, two single stage JFET gain stages with a passive RIAA equalization stage between them and no negative feedback. PM-13 adds a Amorphous core step-up transformer Moving Coil Pre-Preamp. It not only low noise but also is suitable for most low-output MC cartridge.It’s power supply is battery (with charger).

    BPS
    (The battery power supply with charger):
    BPS uses NiMH batteries provide DC24V output.It has automatically charging function.



    When the battery voltage fall down to 20V,it will be charged automatically. It still provide DC24V output through the power transformer, until the battery is full, BPS will disconnect the transformer, continue to use battery.
     
    Specification
    Control Functions: Switch MM / MC
    Harmonic Distortion (for 2V RMS at output): 0.1%
    Input Impedance: 47k ohms (MM) , 30~200ohm (MC)
    Input Gain: 43dB (MM ) / 61dB (MC)
    Input Interfaces: 2 group (RCA)
    Output Interfaces: 1 group (RCA)
    Grounding Interfaces: 1 group
    S/N: 90dB
    Consumption: 1 watt
    Dimensions: PM-13:65x185x163mm(HxWxD) / BPS:65x180x230mm(HxWxD)
    Weight: PM-13:1.3kg / BPS:2kg
     
    RESOURCES
     
    Copyright© The Opera audio Co.,Ltd
    back
    国内精品久久久久精品